学术
SEBS-g-MAH增韧尼龙1012的研究
汪永伟[1] 王玉东[1,2] 赵清香[1] 刘民英[1] 郭方方[1] 付鹏[1]
[1]郑州大学材料科学与工程学院,河南郑州450052 [2]平顶山神马工程塑料有限公司,河南平顶山467013
摘 要:
选用SEBS-g-MAH作为增韧剂，采用和微观形态结构进行了熔融挤出的布法制备了尼龙1012／SEBS-g-MAH的共混合金，并对其力学性能研究。结果表明，随着SEBS-g-MAH用量的增加，共混合金的缺口冲击强度明显提高。当SEKS-g-MAH质量分数为15％时，其缺口冲击强度为125kJ／m^2，是纯尼龙1012的20倍左右，而拉伸强度和弯曲强度保持在70％以上。通过微观形态的研究得出增韧机理为银纹-剪切带增韧机理。[著者文摘]
关 键 词:
文章出处:
《塑料工业》-2008年36卷1期 -57-59页
栏目信息:
分 类 号:
文献标识码:
B
文章编号:
1005-5770（2008）01-0057-03
Study on Toughening of Nylon 1012 by SEBS-g-MAH
WANG Yong-wei , WANG Yu-dong, ZHAO Qing-xiang, LIU Min-ying, GUO Fang-fang, FU Peng （1. College of Material Sei. and Eng., Zhengzhou University, Zhengzhou 450052, China;2. Pingdingshan Shenma Engineering Plastic Co., Ltd., Pingdingshan 467013, China）
Abstract:
With SEBS-g-MAH as toughening agent, nylon 1012/ SEBS-g-MAH blends were prepared by means of blending extrusion. The mechanical properties and morphology of the blends were studied. The results indicated the notched Ized impact strength of the blend improved obviously with the increase of the mass fraction of SEBS-g-MAH. When the mass fraction of SEBS-g-MAH was up to 15%, the notched Izod impact strength of the blend was 125 kJ/m^2, being about 20 times as high as that of pure nylon 1012, and the retention of tensile and bending strength was more than 70%. It was also found that the toughness mechanism of the blend was of the mechanism of ＂craze-shear bands＂ toughening.[著者文摘]
Key words:
Nylon 1012; SEBS-g-MAH; Toughening; Mechanical Properties; Morphology
基金资助:
中国博士后科学基金资助项目（20060452600）
更多>>免费文章
cqvip.com