维普资讯
发表评论我要收藏我要推荐点击“我要推荐”按钮复制地址,推荐文章给别人看,自己就可以获得积分奖励。

带导流管多层流化床流体力学特性实验研究

免费下载
[全文大小:202 K]

刘体锋[1] 杨阿三[1] 孙勤[1] 贾继宁[1] 廖燕芝[1] 宋志军[2]

[1]浙江工业大学化学工程与材料学院,浙江杭州310014 [2]浙江工商大学杭州商学院,浙江杭州310035

化学工程
订阅本刊
国际标准刊号:ISSN 1005-9954
国内统一刊号:CN 61-1136

摘  要:

多层流化床的应用范围受操作可调性和稳定性等因素限制。在改变传统筛板结构的基础上,研究了传统穿流板多层流化床和导流管多层流化床床层压降随表观气速和进料速率的变化规律,实验结果表明,导流管多层流化床不仅大幅减小了床层压降、提高了床体处理能力和可调范围,而且也改善了物料的流化质量。此外,当料层达到一定高度时,导流管多层流化床还具有喷动流化床的特性,同时导流管还具有溢流物料的作用,进一步加大了气固传质效率和床体处理能力。在流体力学分析的基础上,推导出导流管多层流化床床层压降的关联式,得到了床层压降随进气气速和进料速率的关系,与实验数据基本吻合。[著者文摘]

fluidized bed with draft tube;hydrodynamics;mathematics simulation 多层流化床是在单层流化床的基础上发展而来的,与单层相比气体与固体颗粒完全实现了逆流流动,热质传递更加充分,具有单程利用率高、干燥均匀性好¨ 等特点,目前已在化工、轻工、医学、食品以及建材等领域得到了广泛的应用。但由于传统穿流板式多层床具有可调范围窄、操作稳定性和连续性差、设计难度较大、操作控制困难等缺陷_。J,应用受到了一定限制。因而过去10 多年中,加以改进的多层流化床实验研究逐渐得到重视,诸多学者对此做了大量研究J。目前,多采用溢流管式多层流化床,与传统穿流板式多层床相比,操作的稳定性和可调性得到了改善,但当处理能力较大时,必然要极大增加降料管面积,在床截面积不变的条件下减少了传热传质面积(气固接触面积),从而降低了筛板的效率;同时,对溢流管的设计和操作也是十分重要的,如果设计不当,或操作不妥,很容易产生堵塞或气......
Chemical Engineering

栏目信息:

化工流体力学

分 类 号:

TQ051.13

文献标识码:

A

文章编号:

1005-9954(2007)04-0018-04

相关文章:

参考文献(4篇) 耦合文献(23篇)  主题相关

[参考文献]

Experimental study on hydrodynamics of multistage fluidized bed column with a draft tube

LIU Ti-feng, YANG A-san, SUN Qin, JIA Ji-ning, LIAO Yan-zhi, SONG Zhi-jun ( 1. College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014, Zhejiang Province,China; 2. Hangzhou Institute of Commerce, Zhejiang Gongshang University , Hangzhou 310035, Zhejiang Province, China)

Abstract:

The applications of a multistage fluidized bed is limited by the adjustability of operation and stability of operation and so on. A small-size multistage fluidized bed with draft tube was employed to obtain hydrodynamic data in a range in operation condition. The multistage fluidized bed with draft tube exhibits properties different from a conventional one, such as lower stable pressure drop, higher disposal capacity and adjustable range and especially improving the fluidizability of the material. Besides, a multistage fluidized bed with draft tube possesses the characteristic of a spout-fluid bed and the function of fl thus further increasing the diathermanous efficiency and hydrodynamics analysis, the pressure drop characteristics simulated, the simulated results were ooding material when achieving a higher material level, the disposal capacity of column. Finally, based on with solid flux and gas velocity were summarized and agreed with the experimental data.[著者文摘]

Key words:

multistage fluidized bed agreed with the experimental data. draft tube ; hydrodynamics; mathematics simulation

作者简介:

刘体锋(1977-),男,硕士研究生,研究方向为粉体干燥技术与相关设备的研究,电话:13486367200,E—mail:liutifeng1977@163.com; 杨阿三,教授,博士生导师,主要从事化学反应工程及工艺、粉体技术方面的研究。

更多评论>>文章评论
你是匿名用户 登录 | 注册 验证码 刷新
中国业务群个人门户,免费下载!
天元数据 维普资讯 版权所有 Copyright © 2001-2008 cqvip.com Inc. All rights reserved.
渝ICP证 B2-20050021  违法和不良信息举报中心
建议使用:1024x768分辨率,16位以上颜色