学术
化学液相沉积法制备碳／碳复合材料时的温度场研究
潘仡文[1] 杨冬[1] 刘红林[2]
[1]西安交通大学动力工程多相流国家重点实验室,西安710049 [2]中国航天科技集团公司4院43所,西安710025
摘 要:
根据制备过程中碳纤维骨架内煤油发生相变时的气液两相流动与传热传质、预制体对煤油的导热以及碳纤维多孔介质内的传热传质性质，建立了描述碳纤维骨架内温度场分布与相变特性的数学模型．对采用感应加热方式、直径为70mm的预制体在汽化温度为453．15K时的制备过程进行了数值研究，得到了骨架内温度场随时间的变化．给出了不同时刻的温度场分布、径向温度随时间的变化规律，以及相变过程含气率沿径向的分布．将计算所得的电加热功率与制备过程中实际的电加热功率进行了比较，二者较为接近，验证了所建数学模型的可靠性．[著者文摘]
文章出处:
《西安交通大学学报》-2008年42卷3期,384 -309-312,384页
栏目信息:
分 类 号:
文献标识码:
A
文章编号:
0253-987X（2008）03-0309-04
Research on Temperature Field of Kerosene when Preparing Carbon/Carbon Composites by Chemical Liquid Deposition
PAN Yiwen, YANG Dong, LIU Honglin （1. State Key Laboratory of Muhiphase Flow in Power Engineering, Xi＇an Jiaotong University, Xi＇an 710049, China; 2. The 43rd Institute of the 4th Academy of CASE, Xi＇an 710025, China）
Abstract:
A model of temperature field and phase change in the carbon fiber preform was established based on heat and mass transfer of gas and fluid phases flow, heat conduction between the preform and kerosene, and heat and mass transfer in the carbon fiber perform. A numerical investigation on preparation at the vaporization temperature 453.15 K for the preform with a diameter of 70 mm using induction heating was performed. The change of the temperature field with time in the preform was obtained. The temperature distribution at different time, the variation of radical temperature with time, and vapor rates along the radical direction in the phase change process were indicated. The computing results are in agreement with the data of the actual power input of electric heating.[著者文摘]
Key words:
chemical liquid deposition; carbon/carbon composites; temperature field
基金资助:
国家科技支撑计划资助项目（2006BAA03B02-03）.
更多>>免费文章
cqvip.com