学术
摘 要:
研究了炭纤维织物／环氧（CF／EP）复合材料与45^#钢在环．环端面干摩擦状态下的摩擦磨损特性，考查了制备工艺和MoS2与石墨不同配比等对CF／EP复合材料干摩擦性能的影响，采用扫描电子显微镜观察复合材料及其偶件磨损表面形貌．结果表明：半干法制备的环氧树脂体积分数为40％的CF／EP复合材料的摩擦系数稳定；纯CF／EP复合材料主要表现为粘着磨损特性；MoS2与石墨改性后复合材料摩擦磨损性能明显改善，质量比为1．5：1的MoS2与石墨改性CF／EP复合材料具有最佳的摩擦磨损性能，其稳态摩擦系数为0．14～0．15，磨损量3．15×10^-5mg／r．[著者文摘]
文章出处:
《摩擦学学报》-2008年28卷1期 -56-62页
栏目信息:
分 类 号:
文献标识码:
A
文章编号:
1004-0595（2008）01-0056-07
Study on the Tribological Properties of Carbon Fabric/Epoxy Composites
ZH0U Xian-hui, SUN You-song , WANG Wan-shun （1. School of Mechanical and Electronic Engineering, Guangdong University of Technology, Guangzhou 510006, China; 2. Guangzhou City Jingbang Industry and Trade Co. Ltd. , Guangzhou, China ,510700）
Abstract:
Tribological properties of carbon fabric/epoxy （CF/EP） composites under condition of ring-on-ring dry sliding were studied. Effects of preparation processes, adhesive contents, resin, MoS2 and graphite on the tribological properties of CF/EP composites were discussed. Both worn surfaces of composites and their counterparts were analyzed with a scanning electron microscopy. CF/EP composites which prepared with semi-dry method with 40 vol. % adhesive content exhibited a steady friction coefficient. The main wear mechanism of pure CF/EP composites was adhesive. Friction-reducing and anti-wear properties of carbon fabric composites can be greatly improved by filling MoS2 and graphite. The composite prepared with HM-E8A resin after modification exhibited the best tribological properties when the weight ratio of MoS2 to graphite was 1.5： 1. The steady friction coefficient of the composite was 0. 14 ～0.15, and wear loss per revolution was 3.15×10^-5 mg/r.[著者文摘]
Key words:
carbon fabric, epoxy, composite material,friction and wear behavior
基金资助:
广东省自然科学基金资助项目（04009468,020139）.
更多>>免费文章
cqvip.com