学术
摘 要:
以小黑杨人工林为对象,研究树冠特征对木材性质和生长量的影响。结果表明：树冠特征对木材基本密度影响不显著;对抗弯弹性模量（MOE）和顺纹抗压强度影响显著,对抗弯强度（MOR）影响不显著;对纤维长度、纤维宽度以及纤维长宽比影响不大;对胸高处湿心材、边材影响极显著。MOE、MOR和顺纹抗压强度与冠幅、冠长呈负相关。线性回归方程能较好地拟合顺纹抗压强度与冠幅的关系,R^2值达到0.61;纤维长度、宽度与冠幅、冠长呈一定的正相关;湿心材面积、边材面积与冠幅、冠长呈高度正相关,边材面积与冠幅间存在密切的线性关系,方程的R^2值达到0.78,二次多项式方程能很好地拟合湿心材面积与冠幅的关系,R^2值为0.91。[著者文摘]
文章出处:
《林业科学研究》-2007年20卷6期 -801-806页
分 类 号:
文献标识码:
A
文章编号:
1001-1498（2007）06-0801-06
Effects of Crown Attributes on Wood Characteristics and Increments of Populus × xiaohei
WANG Xiao-qing, LIU Xing-e, REN Hai-qing （ Research Institute of Wood Industry, CAF, Beijing 100091, China）
Abstract:
Effects of crown attributes on wood characteristics of Populus xiaohei were studied . The results that effects of crown attributes on basic density were not significant. For MOE and compression strength indicated parallel to grain, the effects were significant, while insignificant for MOR. Crown attributes exerted little impacts on fiber length, fiber width and the ratio of fiber length to width. Effects of crown attributes on sapwood and heartwood area at breast height were highly significant. MOE, MOR, and compression strength parallel to grain were found to be negatively correlated with both crown width and length. In addition, the linear regression model fitted the relationship between compression strength parallel to grain and crown width fairly well, with R^2 value of 0.62. Fiber length and width, to a certain extent, were positively related to crown size. Sapwood and heartwood area were highly, positively related to crown size. Furthermore, a close linear relationship was found between sapwood area and crown width, with R^2 value of 0.78; while a second order polynomial equation were best in describing the relationship of heartwood area with crown width, with R^2 value of 0.91.[著者文摘]
Key words:
tree crown ; wood increments ; wood characteristics
基金资助:
国家自然基金重点项目“利用遥感技术预测人工林木材性质和利用价值的研究”（30230420） 在试验测试过程中,得到许明坤、王爱华、张波等帮助,在此一并表示感谢!
更多>>免费文章
cqvip.com